Lin Engineering
productsstepper motorshybrid stepper motors4418 series
Featured product media

4418 Series
Hybrid Stepper Motor

Features and Benefits:
  • Up to 35 percent more torque than standard NEMA 17 stepper motors
  • Custom wound for high speed or low speed applications
Specifications:
  • NEMA 17 (1.670 in) Frame Size
  • 1.8° Step Angle
  • 1.02 to 1.89 in Length
  • 26.91 to 100.54 oz-in Holding Torque

Models

Model #NEMA sizeFrame sizeStep AngleConnection TypeLength, inCurrent AMPHolding Torque, oz-inResistanceInertia, oz-in²Weight, lbs# of LeadsAvailability
4418F-01NEMA 171.670 in1.8°Bipolar1.020 in0.67 AMP26.91 oz-in7.60.14 oz-in²0.351 lbs4Online
4418L-36NEMA 171.670 in1.8°Bipolar1.890 in2 AMP100.54 oz-in1.60.46 oz-in²0.851 lbs4Online
4418M-01NEMA 171.670 in1.8°Bipolar1.580 in2 AMP70.81 oz-in1.20.37 oz-in²0.65 lbs4Online
4418S-01NEMA 171.670 in1.8°Bipolar1.350 in1.7 AMP60.89 oz-in1.60.29 oz-in²0.551 lbs4Online
4418X-01NEMA 171.670 in1.8°Bipolar1.170 in1.5 AMP36.82 oz-in1.50.21 oz-in²0.452 lbs4Online

Torque Curves

Speed

  • 4418F-01
  • 4418L-36
  • 4418M-01
  • 4418S-01
  • 4418X-01

Find the motor that fits your Target Torque (oz-in) and Target Speed (RPM)

Dimensions

ModelDIM. A (length) in
4418F-011.020 in
4418L-361.890 in
4418M-011.580 in
4418S-011.350 in
4418X-011.170 in

Operating Specifications

Radial Play0.001 in @ 1 lbs
End Play0.003 in @ 3 lbs
Shaft Run Out0.002 TIR
Concentricity of Mounting Pilot to Shaft0.003 TIR
Perpendicularity of Mounting Pilot to Face0.003 TIR
Max Radial Load at Dimension "K" from mounting face6 lbs
Dimension "K"0.620 in
Max Axial Load6 lbs
Maximum Case Temperature176.00 °F maximum
Ambient Temperature-4 °F to 122.00 °F
Storage Temperature-4 °F to 212.00 °F
Humidity Range (%) 85% or less, non-condensing
Magnet Wire InsulationClass B 130 deg C
Insulation Resistance100M Ohm at 500 VDC
Dielectric Strength500 VDC for 1 min

Features And Benefits

Get up to 35% more torque versus a standard motor of the same size.

4418 Series NEMA 17 size stepper motors provide great length to torque ratio. This motor is perfect for applications with limited space, which require more torque than what a standard motor can provide. The 4418 delivers up to 35% more torque than a standard stepper motor of the same length.

Content image

How did we do it?

The design of the 4418 Series stepper motor is similar to our 4118 Series motor. It utilizes an 8-pole stator to maximize the torque output. However, the difference is in our patented low profile end cap (end bell) with an integrated bearing. This low profile end cap allows us to use a larger rotor, with larger magnetic surface, which produces more torque, while retaining short motor length.

Content image

Customizations & Optimizations

Lin Engineering can ensure that your hybrid stepper motor is optimized to deliver the required performance for your specific application, whether it’s increasing torque at a specific speed range, reducing noise or vibration, or optimizing for minimal power consumption, or making specific modification  to ensure proper and native fit within your assembly.

Content image

Customization Services Include: 

  • Optimized Winding
  • Multiple Shaft Options
  • Customized Leads & Connectors
  • Customized Housings & Mountings
  • Bearings & Lubricants
  • Mechatronic Solutions
  • Environmental Protection
  • Drivers & Controllers, Encoders, Gearboxes & Accessories

 

Learn More About Motor Customizations & Optimizations

The result is that you’ll get a motor that is fully optimized for your specific applications and configured to seamlessly fit with your assembly. This reduces your product's complexity, and increases the speed and ease of the assembly of your final product. 

 

Speak with one of our sales representatives about your specific application needs by filling out a request for a quote. 

Downloads

Motor Numbering System (PDF)
Download

Get the motor you need

Just fill out a Request for a Quote form, and tell us about your application and your needs. One of our applications specialists will review your request, and provide you with a quote promptly.