5718 Series - Rapid Prototyping Motors5718M-02PHybrid Stepper Motor
Unit Price:
$93.61
Inventory:
10 Available in 4 Business Days
Ships:
4 Business Days
Part Number:
WO-5718M-02P
Dimensions
| Model | DIM. A (length) in |
|---|---|
| 5718M-02P | 2.220 in |
Torque Curves
Speed
Find the motor that fits your Target Torque (oz-in) and Target Speed (RPM)
Motor Specifications
| Base Motor Part Number | 5718M-02P |
| Configured Motor Part Number | WO-5718M-02P |
| Step Angle | 1.8° |
| Frame Size | 2.250 in |
| NEMA Size | NEMA 23 |
| Body Length | 2.220 in |
| Current (AMP) | 4.2 AMP |
| Holding Torque | 172.77 oz-in |
| Resistance | 0.5 ohm |
| Rotor Inertia | 1.5 oz-in² |
| Number of leads | 4 |
| Connection | Parallel |
| Weight | 1.501 lbs |
Operating Specifications
| Radial Play | 0.001 in @ 1 lbs |
| End Play | 0.003 in @ 3 lbs |
| Shaft Run Out | 0.002 TIR |
| Concentricity of Mounting Pilot to Shaft | 0.003 TIR |
| Perpendicularity of Mounting Pilot to Face | 0.003 TIR |
| Max Radial Load at Dimension "K" from mounting face | 15 lbs |
| Dimension "K" | 0.550 in |
| Max Axial Load | 13 lbs |
| Maximum Case Temperature | 176.00 °F maximum |
| Ambient Temperature | -4 °F to 122.00 °F |
| Storage Temperature | -4 °F to 212.00 °F |
| Humidity Range (%) | 85% or less, non-condensing |
| Magnet Wire Insulation | Class B 130 deg C |
| Insulation Resistance | 100M Ohm at 500 VDC |
| Dielectric Strength | 500 VDC for 1 min |
Specialty Motors
Customizations & Optimizations
Lin Engineering can ensure that your hybrid stepper motor is optimized to deliver the required performance for your specific application, whether it’s increasing torque at a specific speed range, reducing noise or vibration, or optimizing for minimal power consumption, or making specific modification to ensure proper and native fit within your assembly.
Customization Services Include:
- Optimized Winding
- Multiple Shaft Options
- Customized Leads & Connectors
- Customized Housings & Mountings
- Bearings & Lubricants
- Mechatronic Solutions
- Environmental Protection
- Drivers & Controllers, Encoders, Gearboxes & Accessories
The result is that you’ll get a motor that is fully optimized for your specific applications and configured to seamlessly fit with your assembly. This reduces your product's complexity, and increases the speed and ease of the assembly of your final product.
Speak with one of our sales representatives about your specific application needs by filling out a request for a quote.
Encoder Options
Gearbox Options
| Stage | Dimension A |
| 1 | 106mm (4.17in) |
| 2 | 127.5mm (5.02in) |
| Stage | 1 | 2 | |||
|---|---|---|---|---|---|
| Ratio | 5 | 10 | 20 | 50 | |
| Nominal Output Torque | Nm | 60 | 40 | 50 | 60 |
| Emergency Stop Torque | Nm | 3 times nominal output torque | |||
| Nominal Input Speed | RPM | 5000 | |||
| Max Input Speed | RPM | 10000 | |||
| Max Radial Load | N | 1377 | |||
| Max Axial Load | N | 765 | |||
| Efficiency η | % | 90 | 85 | ||
| Backlash | arcmin | <5 | <7 | ||
| Protection Class | IP65 | ||||
| Service Life | hr | 20000 | |||
| Weight | kg | 1.4 | 1.6 | ||
| Operating Temperature | °C | -20 to 90 | |||
| Lubrication | synthetic lubrication oils | ||||
| Noise (n = 3000 rpm) | dB(A) | 56 | 54 | 58 | 55 |
| Mass Moment of Inertia | kg-cm² | 0.13 | 0.13 | 0.03 | 0.03 |
5718 Series
Downloads
WO-5718M-02P Configured Datasheet (PDF)
Motor Numbering System (PDF)
DownloadGet the motor you need
Just fill out a Request for a Quote form, and tell us about your application and your needs. One of our applications specialists will review your request, and provide you with a quote promptly.