Lin Engineering
productsstepper motorshybrid stepper motorse5718 series
Featured product media

E5718 Series
Hybrid Stepper Motor

Features and Benefits:
  • 40 percent more torque than standard NEMA 23 stepper motors
  • High Torque Per Size Ratio
Specifications:
  • NEMA 23 (2.250 in) Frame Size
  • 1.8° Step Angle
  • 2.24 to 3.43 in Length
  • 260.57 to 600.43 oz-in Holding Torque

Models

Model #NEMA sizeFrame sizeStep AngleConnection TypeLength, inCurrent AMPHolding Torque, oz-inResistanceInertia, oz-in²Weight, lbs# of LeadsAvailability
E5718-057-02PNEMA 232.250 in1.8°Parallel2.240 in4.2 AMP260.57 oz-in0.461.64 oz-in²1.64 lbs4Quote
E5718-057-02SNEMA 232.250 in1.8°Serial2.240 in2.1 AMP260.57 oz-in1.841.64 oz-in²1.64 lbs4Quote
E5718-057-04PNEMA 232.250 in1.8°Parallel2.240 in1.4 AMP260.57 oz-in3.781.64 oz-in²1.64 lbs4Quote
E5718-057-04SNEMA 232.250 in1.8°Serial2.240 in0.7 AMP260.57 oz-in15.121.64 oz-in²1.64 lbs4Quote
E5718-057-05PNEMA 232.250 in1.8°Parallel2.240 in2.8 AMP260.57 oz-in0.891.64 oz-in²1.64 lbs4Quote
E5718-057-05SNEMA 232.250 in1.8°Serial2.240 in1.4 AMP260.57 oz-in3.591.64 oz-in²1.64 lbs4Quote
E5718-090-04PNEMA 232.250 in1.8°Parallel3.430 in6.5 AMP600.43 oz-in0.333.32 oz-in²2.802 lbs4Quote
E5718-090-04SNEMA 232.250 in1.8°Serial3.430 in3.25 AMP600.43 oz-in1.323.32 oz-in²2.802 lbs4Quote
E5718-090-06PNEMA 232.250 in1.8°Parallel3.430 in2.8 AMP600.43 oz-in1.193.32 oz-in²2.802 lbs4Quote
E5718-090-06SNEMA 232.250 in1.8°Serial3.430 in1.4 AMP600.43 oz-in4.743.32 oz-in²2.802 lbs4Quote
E5718-090-07PNEMA 232.250 in1.8°Parallel3.430 in2 AMP600.43 oz-in2.93.32 oz-in²2.802 lbs4Quote
E5718-090-07SNEMA 232.250 in1.8°Serial3.430 in1 AMP600.43 oz-in11.583.32 oz-in²2.802 lbs4Quote

Torque Curves

Speed

  • E5718-057-02P
  • E5718-057-02S
  • E5718-057-04P
  • E5718-057-04S
  • E5718-057-05P
  • E5718-057-05S
  • E5718-090-04P
  • E5718-090-04S
  • E5718-090-06P
  • E5718-090-06S
  • E5718-090-07P
  • E5718-090-07S

Find the motor that fits your Target Torque (oz-in) and Target Speed (RPM)

Dimensions

ModelDIM. A (length) in
E5718-057-02P2.240 in
E5718-057-02S2.240 in
E5718-057-04P2.240 in
E5718-057-04S2.240 in
E5718-057-05P2.240 in
E5718-057-05S2.240 in
E5718-090-04P3.430 in
E5718-090-04S3.430 in
E5718-090-06P3.430 in
E5718-090-06S3.430 in
E5718-090-07P3.430 in
E5718-090-07S3.430 in

Operating Specifications

Radial Play0.001 in @ 1 lbs
End Play0.003 in @ 3 lbs
Shaft Run Out0.002 TIR
Concentricity of Mounting Pilot to Shaft0.003 TIR
Perpendicularity of Mounting Pilot to Face0.003 TIR
Max Radial Load at Dimension "K" from mounting face15 lbs
Dimension "K"0.550 in
Max Axial Load13 lbs
Maximum Case Temperature176.00 °F maximum
Ambient Temperature-4 °F to 122.00 °F
Storage Temperature-4 °F to 212.00 °F
Humidity Range (%) 85% or less, non-condensing
Magnet Wire InsulationClass B 130 deg C
Insulation Resistance100M Ohm at 500 VDC
Dielectric Strength500 VDC for 1 min

Customizations & Optimizations

Lin Engineering can ensure that your hybrid stepper motor is optimized to deliver the required performance for your specific application, whether it’s increasing torque at a specific speed range, reducing noise or vibration, or optimizing for minimal power consumption, or making specific modification  to ensure proper and native fit within your assembly.

Content image

Customization Services Include: 

  • Optimized Winding
  • Multiple Shaft Options
  • Customized Leads & Connectors
  • Customized Housings & Mountings
  • Bearings & Lubricants
  • Mechatronic Solutions
  • Environmental Protection
  • Drivers & Controllers, Encoders, Gearboxes & Accessories

 

Learn More About Motor Customizations & Optimizations

The result is that you’ll get a motor that is fully optimized for your specific applications and configured to seamlessly fit with your assembly. This reduces your product's complexity, and increases the speed and ease of the assembly of your final product. 

 

Speak with one of our sales representatives about your specific application needs by filling out a request for a quote. 

Downloads

Motor Numbering System (PDF)
Download

Get the motor you need

Just fill out a Request for a Quote form, and tell us about your application and your needs. One of our applications specialists will review your request, and provide you with a quote promptly.