4118 Series - Rapid Prototyping Motors4118S-04SHybrid Stepper Motor
Unit Price:
$63.61
Inventory:
10 Available in 4 Business Days
Ships:
4 Business Days
Part Number:
WO-4118S-04S
Dimensions
| Model | DIM. A (length) in |
|---|---|
| 4118S-04S | 1.340 in |
Torque Curves
Speed
Find the motor that fits your Target Torque (oz-in) and Target Speed (RPM)
Motor Specifications
| Base Motor Part Number | 4118S-04S |
| Configured Motor Part Number | WO-4118S-04S |
| Step Angle | 1.8° |
| Frame Size | 1.670 in |
| NEMA Size | NEMA 17 |
| Body Length | 1.340 in |
| Current (AMP) | 0.67 AMP |
| Holding Torque | 42.48 oz-in |
| Resistance | 9.9 ohm |
| Rotor Inertia | 0.18 oz-in² |
| Number of leads | 4 |
| Connection | Series |
| Weight | 0.401 lbs |
Operating Specifications
| Radial Play | 0.001 in @ 1 lbs |
| End Play | 0.003 in @ 3 lbs |
| Shaft Run Out | 0.002 TIR |
| Concentricity of Mounting Pilot to Shaft | 0.003 TIR |
| Perpendicularity of Mounting Pilot to Face | 0.003 TIR |
| Max Radial Load at Dimension "K" from mounting face | 6 lbs |
| Dimension "K" | 0.620 in |
| Max Axial Load | 6 lbs |
| Maximum Case Temperature | 176.00 °F maximum |
| Ambient Temperature | -4 °F to 122.00 °F |
| Storage Temperature | -4 °F to 212.00 °F |
| Humidity Range (%) | 85% or less, non-condensing |
| Magnet Wire Insulation | Class B 130 deg C |
| Insulation Resistance | 100M Ohm at 500 VDC |
| Dielectric Strength | 500 VDC for 1 min |
Features
Unbeatable Value
The 4118 Series stepper motor is our best-selling stepper motor for numerous reasons: it delivers unbeatable balance between high performance and low price; it offers a high range of customizations; and its wide performance range makes it ideal for many applications.
Versatile performance
The 4118 Series stepper motor is a good fit for wide range of applications. The series is available in many stator lengths, from 1.34” (34mm) to 2.34” (59.4mm). Holding torque ranges from 44 oz-in (0.3 Nm), up to 115 oz-in (0.88 Nm). High range of dynamic torque with speed up to 1200 RPM. And a large selection of windings to meet your specific requirements.
Lin Engineering Quality
Every component and every motor that leaves our facility must meet our mean value control. Additionally, every motor is tested to meet the required electrical specifications (resistance, inductance, leakage), torque specifications (holding and detent torque), mechanical specification (front shaft extension dimension and overall body length), and any other special feature specification. We want to ensure that your motor delivers the precise specifications you require. This gives you confidence that your motors will perform consistently and reliably within your application.
Specialty Motors
4118 Series
Downloads
WO-4118S-04S Configured Datasheet (PDF)
Motor Numbering System (PDF)
DownloadGet the motor you need
Just fill out a Request for a Quote form, and tell us about your application and your needs. One of our applications specialists will review your request, and provide you with a quote promptly.